- Robert E. Petersen Gallery
- Old Guns in a New World
- The Road to American Liberty
- Seeds of Greatness
- The Prospering New Republic
- A Nation Asunder
- The American West
- The New Prosperity
- An Age of Elegance
- America Ascending
- Ever Vigilant
- For the Fun of It
- Firearms Traditions for Today
- William B. Ruger Special Exhibits
- Freedom's Doorway
Sharps Model 1874 Creedmoor Rifle No 3 Rifle
Many shooters seeking a Sharps target rifle converted older percussion arms to use metallic cartridges and mounted new sights. SN 80947
Sharps (U.S.) Model 1874 Lever-Action Falling-Block Creedmoor Rifle (single-shot/ breech-loading/ black powder/ cartridge ammunition) 1876 marked the Centennial of the United States. The nation's economic and technological progress had been tremendous over the previous one hundred years. To celebrate, America's first World's Fair was held at Philadelphia, where all sorts of technological wonders were on display. Winchester, Colt, Remington, and other arms makers showed off their best work.
Among the displays were a few guns bearing the legend, Old Reliable," which embodied Christian Sharps' spirit. Sharps rifles had become a legend during the Civil War, and their fame continued on the frontier, where they were used with great success. The Sharps Creedmoor Rifle exhibited here, which enjoyed popularity with competitive target shooters, was among the last products of a fading company." --Dr. William L. Roberts, THE AMERICAN LIBERTY COLLECTION; #90 The International Match held at the famous Creedmoor Range on Long Island in 1874 pitted an upstart American squad against a championship team from the Irish Rifle Association. The Irish were veterans of international competition and were generally acknowledged as the best in the world. This match included three individual segments fired at ranges of 800, 900, and 1000 yards.
The Americans won the 800- yard competition with a score of 326 to 317. At 900 yards, though, the Irish won by two points, 312 to 310, and they also took top honors at 1000 yards with a score of 302 to 298. However, the final result was a close victory for the Americans Ñ 934 to 931. The match received international publicity, and as a result, target shooting blossomed into a major American sport. The visiting team was outfitted with .45 caliber Rigby muzzle-loading match rifles. These were built by Master Gunsmith John Rigby, also a member of the Irish team and widely considered to be one of the best shots in the British Empire. His rifles had a reputation for accuracy, as well as a long history in British competition.
The American competitors used both Sharps and Remington .44 caliber breech-loading single-shot rifles that were loaded with heavy powder charges and heavy paper-patched bullets. The most effective of all long-range target cartridges were the .44-90 Sharps and .44-90 Remington. The .44-90 Remington cartridge was loaded with a 550-grain bullet which had a muzzle velocity of 1250 f.p.s. The .44-90 Sharps cartridge was typically loaded with a 520-gr. bullet capable of 1270 f.p.s. Muzzle energy of both of these rounds was about 1850 ft.-lbs, compared to 1600 ft.-lbs. for the standard .45-70 Government cartridge. Neither cartridge approached the power level of the .44-100 Remington or .45-100 Sharps rounds which delivered over 2,200 ft.-lbs. of muzzle energy.
The special high-quality Sharps and Remington rifles furnished to the American team were fitted with precision sights. The usual wind-gauge target front sight was mounted in a dovetail cut in the barrel near the muzzle. This assembly provided accurate lateral adjustment of the front sight by means of a screw. Accurate scales were engraved on the front side of the sight assembly so that precise measurements of windage could be made. The sight tube or globe was slotted so that interchangeable sighting inserts could by used to provide optimum sight patterns for various target conditions.
The elaborate aperture rear sights fitted to these rifles were either mounted on the receiver tang or attached to the top of the buttstock forward of the buttplate. The latter sight position was used by some shooters who preferred to lie on their backs and support the rifle muzzle with their knees or feet. The long sight leaves employed on these rear sights pivoted on a fixed base. The shooter aimed through a tiny aperture peephole drilled in the center of the 1-inch diameter sunshade disk. The vertical position of the sighting aperture disk was usually determined by a long slender screw less than 1/8" in diameter, with a 20-pitch thread that permitted very accurate elevation adjustments. These tall rear sights were precision instruments, and often included vernier adjustment scales. When not in use, they were either stored in protective cases or folded down flat against the receiver tang.
Christian Sharps (1811-1874) was the originator of a line of sturdy, practical, and popular military and sporting rifles and handguns that were associated with several events that shaped American history in 19th century, including armed conflict in Kansas during the 1850s, the Civil War, the era of the Plains buffalo hunter, and the rise of modern long-range competition shooting during the 1870s. Sharps worked at John Hall's Rifle Works in Harpers Ferry, Virginia, where he learned the principles of arms manufacturing. His first breechloading rifle design was patented in 1848, and the toggle-linking trigger guard and vertically operating sliding wedge breechblock of later Sharps rifles and carbines date from that patent. These features are still with us today, and have seen use in both rifle and artillery breech mechanisms. The spring lever-toggle-breech mechanism of the Borchardt-Luger semi-automatic pistol also had its roots in Christian Sharps' lever-linked breech.
In 1850, Sharps moved to Mill Creek, Pennsylvania, near Philadelphia, and contracted with the firm of A. S. Nippes to manufacture two of his sporting rifle designs, which became known as the Model 1849 and Model 1850. Faced with difficulty in obtaining financing for further ventures, Sharps left the Philadelphia area in 1851 and relocated to Hartford, Connecticut, where he formed the Sharps Rifle Manufacturing Company. Lacking production facilities, he contracted with the Windsor, Vermont firm of Robbins & Lawrence to manufacture his new breechloader. This venture continued until 1855.
Among the Sharps-designed firearms manufactured under this association were the Model 1851 "Box Lock" Carbine, which featured the Maynard tape primer system, and the Model 1852 and Model 1853 "Slanting Breech" Carbines, which were equipped with the Sharps-patented pellet primer system as an integral part of its breech mechanism. Model 1853 Carbines were nicknamed "Beecher's Bibles," after noted New York clergyman and abolitionist Henry Ward Beecher. Approximately 900 of these arms were shipped in heavy crates marked BIBLES for use by anti-slavery "Free Soil" settlers who were fighting against pro-slavery forces in "Bleeding Kansas" during the 1850s. One of the most famous Free Soilers was John Brown, who later used 300 Model 1853 Carbines in his ill-fated attempt to capture the U.S. Armory at Harpers Ferry, Virginia in 1859.
Christian Sharps served as technical advisor to the Sharps Rifle Manufacturing Company, receiving royalties on the manufacture of their firearms. His relationship with the company was a rocky one, and in 1853, Sharps severed all connections with the firm. There is no evidence that he ever had any further association with the company that continued to bear his name. In 1855, the Sharps company introduced the Model 1855 Carbine. These arms retained the slanting breech and buttstock patch boxes of earlier models, but featured the Maynard tape primer system. Approximately 800 .54 caliber carbines were manufactured for the U.S. government, and an additional 6,000 Model 1855s in .577 caliber were purchased by Great Britain. While these carbines were in production, both Robbins & Lawrence and Sharps suffered serious financial losses. The latter corporation went bankrupt, and their operations were taken over by Sharps and moved to Hartford.
The Sharps New Model 1859, introduced in that year, was available as a carbine, and in round-barrel military rifle or octagonal-barrel sporting rifle versions. Its straight-breech design is credited to Richard S. Lawrence, formerly of Robbins & Lawrence, who had become the superintendent of the Sharps Rifle Company. This design, in conjunction with a breechblock-mounted plate capable of slight rearward movement when under pressure, created a moderately effective gas seal. New Model 1859 arms also employed an improved version of the Sharps pellet primer system which allowed the pellet feed mechanism to be disengaged. Ordinary percussion caps could then be used, with the supply of pellet primers held in reserve. Like earlier Sharps designs, the Model 1859 fired a glazed linen combustible .52 caliber cartridge. When closed, the breechblock sheared off the rear of the cartridge, exposing the propellant. During the Civil War, the Federal government bought over 80,000 Sharps carbines and nearly 10,000 Sharps Rifles.
These arms were highly regarded by the troops who used them. Sharps Carbines found favor with Federal cavalry troopers, and New Model 1859 Rifles were used with great success by famous infantry units such as Colonel Hiram Berdan's U.S. Sharp Shooters, perhaps the first specialty troops in the history of modern warfare, as well as the 5th New York (Duryea's Zouaves) and the 13th Pennsylvania Reserves (Bucktails). Even the Confederate government recognized the superiority of the New Model 1859 Carbine, contracting with the Richmond firm of S.C. Robinson for the production of 5,000 copies.
The New Model 1859 was followed by the New Model 1863 and New Model 1865 Carbines and Rifles. These were nearly identical to the New Model 1859, differing primarily in barrel stampings, the omission of buttstock patchboxes, and in the design or absence of bayonet lugs. Many versions of all three arms were later converted for use with .50-70 and .52-70 caliber metallic cartridge ammunition in the years following the Civil War. The New Model 1869 Carbine and Rifle, available in .44-77, .50-70, and .60 calibers, were the first Sharps arms designed for use with metallic cartridges. In 1874, the firm was reorganized as the Sharps Rifle Co., with operations remaining in Hartford. In 1876, manufacturing was moved to Bridgeport, Connecticut, where it remained until 1881.
This period saw the manufacture of some of the more notable of Sharps longarms, beginning with introduction of the Model 1874 Rifle. Nicknamed "Old Reliable," this arm, available in a variety of calibers, barrel lengths, sights, and other features, became a favorite with both Plains buffalo hunters and competition shooters. Many Fancy-Grade models featured engraving which ranged from simple scrollwork to elaborate hunting or western scenes on their surfaces.
The Sharps Model 1877 shared in the popularity of its predecessor. These deluxe-grade heavy-barreled .45 caliber rifles were designed specifically for Creedmoor and other long-range target shooters. Only 100 of these were produced, and they are as sought-after today by collectors as they were by competitors at the time of their introduction. The last rifle to be produced by the Sharps Rifle Company was the Model 1878 Sharps-Borchardt Rifle.
This arm was developed by Hugo Borchardt, who later became famous for his automatic pistol designs. These rifles, with their flat-sided frame and hammerless appearance, differ notably from earlier Sharps designs. Like the Model 1874, the Sharps-Borchardt was available in a variety of stocks, barrel lengths and weights, sights, calibers, and other features, including deluxe grade models. These popular rifles were produced until 1881, when the Sharps Rifle Company went bankrupt and ceased operations.
Although his association with the Sharps Rifle Manufacturing Company ended in 1853, Christian Sharps continued to work as a designer and manufacturer of firearms. He returned to Philadelphia and formed C. Sharps & Co., a manufacturer of percussion revolvers, breechloading single-shot pistols and pistol-rifles, and four-shot pepperbox pistols. In 1862, Sharps entered into a partnership with William Hankins.
Their new company, known as Sharps & Hankins, continued to produce pepperbox pistols, as well as the single-shot .52 caliber Model 1861 Navy Rifle and the Model 1862 Carbine, both of which featured sliding breech actions. The partnership was dissolved in 1866, and Sharps reverted to the C. Sharps & Co. name. This firm ceased operations in 1874 with the death of Christian Sharps on March 12 of that year.